This page is part of © FOTW Flags Of The World website

Denmark Masthead Pennants

Last modified: 2021-08-25 by christopher oehler
Keywords: denmark | masthead pennant |
Links: FOTW homepage | search | disclaimer and copyright | write us | mirrors



[Masthead pennant]

~1:17 by Željko Heimer

Red pennant with rectangular indentation on the fly with a white cross throughout. As it is a naval pennant (dark red) there would presumably be a formal requirement for dimensions.
Željko Heimer, 26 May 2004

[Masthead pennant]

~1:17 by Željko Heimer

Flaggenbuch (1939) shows a different split in the pennant, with construction details: indentation 1/3 length, cross at 1/6 length from hoist, length 1-7.5 m.
Željko Heimer, 31 May 2004

[Masthead pennant]

~1:17 by Željko Heimer

Flaggenbuch (1992) reprint of 1941 edition shows similar construction details: indentation 1/3 length, cross at 1/6 length from hoist, length 1-15 m, white cross width at hoist 1/3 of hoist. However, the fly width, the width of the white stripe at the fly, the shape (and width & length) of the indentation are not defined. I just can't believe that these things are not defined and that we should be looking into Danish regulations for the answers. However, I do believe that it is different from what many sources show. The fly end does not end into two points, but is rather "cut off" vertically, just as are all those triangular pennants. Also I believe that the indentation is yet lesser then the white stripe at fly. I believe that the third image above would be at this moment the best we can do...unless someone comes out with some new information.
Željko Heimer, 31 May 2004